Detailed usage method of Flue Gas Sulfur Dioxide Removal Catalyst

Flue Gas Sulfur Dioxide Removal Catalyst is a very safe scavenger that can safely and efficiently remove SO2 residues in food.

Flue Gas Sulfur Dioxide Removal Catalyst uses sub-salt for color treatment, rinse with water, and then use sulfur dioxide scavenger. Before use, dilute the sulfur dioxide scavenger with 10-50 times of clear water, and then soak the treated items in this agent diluent for 15-30 minutes; or dilute 100-200 times with water and soak for 1-2 hours. Then pick it up and wash it with clean water. The dilution factor of the sulfur dioxide scavenger should be determined by the residual amount of SO2 in the articles to be processed. The scavenger concentration is high, its ability to remove SO2 is strong. It can reduce the residual amount of SO2 in the processed items from 1000mg/Kg to less than 20mg/Kg, or even zero.

Flue Gas Sulfur Dioxide Removal Catalyst 1 Kg can process at least 500 Kg of sulfur-containing materials.

Well, the above is the detailed instructions for using Flue Gas Sulfur Dioxide Removal Catalyst introduced to you today, I hope it will be helpful to you.